Panel Lock; Menu - Thermador TCM24PS Guía De Usuario

Ocultar thumbs Ver también para TCM24PS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Panel lock

The appliance can be locked to prevent the
unintended activation and protect children
against scalding and burns.
● Press and hold A for at least
4 seconds� "Panel lock activated" briefly
appears on the display�
No further operation is now possible; only
I can be pressed.
● To deactivate the child lock, press and
hold A for at least 4 seconds�
"Panel lock deactivated" briefly appears on
the display�

Menu

The menu is used for changing individual
settings, accessing information and
launching processes�
● Press A to open the menu�
The different setting options will appear.
Navigating through the menu:
The various menu points, e�g� "Language"
can be selected with the K or L button.
The respective setting, e�g� "English" is
displayed with M and changed with K
or L� Press N to exit the respective
setting again�
Language
Set the language you require
For example:
Set the appliance at 15 minutes to switch
off automatically:
● Press A� The menu opens�
● Select "Switch off after" with the K or
L arrow button.
● Press the M arrow button.
● Select "0h 15min" with the K or L
arrow button.
● Press A� "Save changes?"
appears�
English
● Press the M arrow button. The setting
is saved�
The drink selection appears on the display�
Note:
Press A to exit the menu at any
time� If no entry is made within approx�
30 seconds, the menu closes automatically
and the settings are not saved�
The following settings can be made:
Language
Set the desired language to show the
display texts�
Water hardness
Set this to the local water hardness�
Level "1 (soft)" to "4 (very hard)" can be
selected� The preset water hardness is
"4 (very hard)"�
Note:
It is important to set the water hardness
correctly to enable the appliance to accu-
rately indicate when the descaling program
should be run.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier� If a water softening
system is installed in the house, please
select the "Softening device" setting�
Water filter
If a water filter is inserted, renewed or
removed, the setting "Activate", "Replace" or
"Remove" must be made in the menu.
Note:
A water filter lessens limescale deposits
and reduces impurities in the water�
The appliance also does not need to be
descaled so often�
Water filters are available from retail outlets
or from Customer Service (see the section
"Accessories").
Inserting or renewing a water filter:
A new water filter must be rinsed before it
can be used.
● Select either "Activate" or "Replace" with
the M or N arrow button.
Panel lock
en
17

Publicidad

Tabla de contenido
loading

Tabla de contenido