Loading; Loading For Best Cleaning And Drying Performance - KENMORE ELITE 665.1471 Manual De Uso Y Cuidado

1. To add rinse aid, open the rinse dispenser lid by gently
pushing in the center of the lid with your thumb and pulling
up on the edge.
2. Pour rinse aid into the opening until the dispenser is full.
Do not overfill.
3. Clean up any spilled rinse aid. Spilled rinse aid can create
excessive suds.

Loading for Best Cleaning and Drying Performance

1. Angle dirtiest dish surfaces downward and allow
space for water to flow up through each rack and
between dishware.
Separating allows water flow.
2. For best silverware cleaning, use the slots in the
covers to keep items separated.
Separated
4. Then, close the dispenser by pushing down gently on the lid.
Rinse Aid Setting
Your rinse aid dispenser is adjustable.
For most water conditions, the factory
setting will give good results. If you have
hard water and notice calcium buildup
on your dishware, you may want to try a
higher setting. If you notice foam in your
dishwasher, use a lower setting.
To adjust the setting:
Turn the arrow adjuster to a higher number
to increase the amount of rinse aid.

LOADING

3. Use TurboZone
toward the lower back.
4. Angle concave surfaces, such as the bottom of
coffee cups, to allow water to drain and improve
drying performance.
option with your dirtiest items facing
®
Soil facing TurboZone ® spray jets
Angled surfaces
11