Vhf Configuration - Televes Avant 5 Manual De Instrucciones

User instructions
5.- VHF CONFIGURATION menu
The next menu is VHF Configuration:
- Allow to activate/deactivate the VHF input. In Manual Adjustment (Offset) allows to increase or decrease the
level of the filter one dB per press (once the filter has already been adjusted automatically).
- (short press) - Places the cursor on the position of the VHF filter or on the manual adjustment of the VHF filter
(Offset).
- (long press) - Enters the extended menu.
- (short press) - Changes to the FM Configuration menu
- (long press) - Saving and adjustment
Procedure
Press the button to activate (blinks) the option -VHF-. Use
VHF input.
VHF config
------------
VHF: OFF
Offset: --
After performing an automatic adjustment of the unit, the Offset function is activated.
This option allows to increase or decrease the level of the selected filter one dB per press (once the automatic adjus-
ment has been made). The display will blink during the readjusment process (one dB per press). Once the readjustment
has finished the reached valued will be shown, informing whether it was possible or not to increase/decrease the output
level. It will not be able to readjust if it goes back to the previous value.
VHF config
------------
VHF: OFF
Offset: +0dB
Note:
- The manual adjustment (Offset) will only be accessible if the unit has already been adjusted and the VHF input is
active (VHF: ON). After the automatic adjustment the offset will be initialized at 0dB.
Example:
VHF config
------------
VHF: OFF
Offset: --
VHF config
------------
VHF: OFF
Offset: --
VHF config
------------
VHF: ON
Offset: +2dB
VHF input deactivated (manual adjustment not available).
buttons to activate (ON) or deactivate (OFF) the
VHF config
------------
VHF: ON
Offset: --
44
"Avant 5"