Saving And Adjustment Process - Televes Avant 5 Manual De Instrucciones

User instructions
Saving and Adjustment process (Programming unit PCT 3.0)
Press for more than three seconds from any of the menus/submenus and the saving and adjustment process will
begin. The display will indicate the following information:
GrAb. : Saving the configuration in EEPROM
AJUS : Starting the adjustment
U -- : UHF adjustment
n -- : Adjusting each filter ("n" indicates the filter number)
u -- : VHF adjustment (if it has not been cut-off)
FM-- : FM adjustment (if it has not been cut-off)
vOUt : Output attenuator adjustment
U -- : Adjustment of the highest channel programmed to a specific output level
The errors regarding a high or low level are indicated by the dashes: FM _ _ (low level in FM) or FM
FM) and the adjustment can be attempted again by pressing the
it by pressing the button quickly (displays FM...).
button quickly (returns to
> 3 seg.
59 59
"Avant 5"
_ _
(high level in
FM--) or you can ignore