Using The Remote Control - HoMedics AR-20 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

Fig. 4

1. On/Off and Speed Settings

• To turn the air cleaner on, press the ON/OFF

When the air cleaner is on, the LED light in the ON/OFF button on the control panel

will be lit and the air cleaner will start to operate on LOW speed.

• Once the air cleaner is ON, press the SPEED

settings. The speeds will cycle as follows LOW ->MEDIUM

each time the SPEED button is pressed, and the corresponding symbol on

the LED control panel will light. The cycle will repeat starting back at LOW.

• To turn the air cleaner OFF, simply press the ON/OFF

control panel.

2. Timer

There are six possible timer settings: 2 (two) hours, 4 (four) hours, 6 (six) hours, 8

(eight) hours, 10 (ten) hours and 12 (twelve) hours. To activate the timer and select a

time setting, press TIMER

on the control panel. Each time the TIMER

is pressed, it will switch between settings in a repeating cycle as follows: 2 hours, 4

hours, 6 hours, 8 hours, 10 hours, 12 hours, OFF. Press again and the cycle begins

again. The selection will light up on the LED control panel matching the time period.

When the timer is OFF, no selections will be lit.

4. Place the tabs at the bottom of

the grill plate into the base of the

unit. Gently push the grill plate

back into place until you hear

a click sound indicating that the grill

is firmly latched.

Connect the power cord into a

standard AC outlet.

button on the control panel.

button to select speed

->HIGH

button on the

function