RuarkAudio MR1 mk2 Guia Del Usuario página 8

Bluetooth
To stream audio from a Bluetooth audio device you
first need to pair it with your MR1 speakers.
Pair and connect your device
1
Select Bluetooth mode on your MR1
Repeatedly press the control knob until the
blue Bluetooth LED lights up; it will start
to flash indicating your MR1 are waiting
to pair with a Bluetooth audio device.
2
Pair your Bluetooth audio device
Go to settings on your audio device, turn on
Bluetooth and select "Ruark MR1" from the
device list (it may take a few seconds for them
to appear). When your MR1 have paired and
connected, the blue LED will change to solid blue.
3
Start music play on your Bluetooth device
You may need to select "Ruark MR1" or
Bluetooth as your playback device.
Auto connect
Your MR1 will automatically attempt to connect
to the last connected Bluetooth device.
EN-8
Operating range
Your MR1 will typically operate up to 10 metres
from your Bluetooth audio device although
obstructions such as walls will reduce this.
Disconnecting a device
Press the control knob or press the Bluetooth
button on the remote control. This will disconnect
the current device, the blue LED will flash and your
MR1 will be ready to pair or connect again.
Pairing additional devices to your MR1
You can pair up to 8 devices although you will only
be able to play audio from one device at a time.
Clearing the pairing list
Press and hold the control knob for 5s until all 3 LEDs
light up. You may also need to unpair or delete the
"Ruark MR1" entry in your device's Bluetooth pairing list.
Volume control
The volume controls on your Bluetooth audio
device and your MR1 will remain independent of
each other, we recommend turning the volume
to near maximum on your audio device and
controlling the output volume on the MR1.