(9) Taking photographs manual flash activation, slower shutter speeds and pre-flash light
(can only be selected using "2nd setting level", see "Selectable modes", p. 89)
Setting/Displays
Operating step
1. When setting the
function
2. After setting the
function/when
pressing the shutter
release button
(at least to the
pressure point)
3. During the exposure
(only for automatic
switching to long
time exposures)
4. After the exposure
Note: With low light, i.e. slower shutter speeds than
the flash, the camera should only be moved when the film has been advanced.
In the data panel
In the viewfinder
q
,
and
–
t
S
flashing
q
,
and
; also
As for default mode (No. 1); for automatic switching to long time expo-
t
S
for automatically
sures, for 2 s the following appear alternately:
B
controlled long time
aperture) or the set aperture (with A) and
exposures
sure times >30 s)
q
,
,
and
;
The relevant focus status display and
B
t
S
at the same time the
counter switches to
display the expired
exposure time
q
,
, and
As for default mode (No. 1)
t
S
1
/
60
s, the camera should be held steady, supported, or a tripod used. Even after
99
q
t
S
(with P, for the largest
(representing the expo-