(4) Taking photographs with automatic flash activation, slower shutter speeds and pre-flash light
(can only be selected using "2nd setting level", see "Selectable modes", p. 89)
This mode allows you to use the functions of modes 2 and 3 in combination.
Setting/Displays
Operating step
1. When setting the
function
2. After setting the
function/when
pressing the shutter
release button
(at least to the
pressure point)
3. During the exposure
(only for automatic
switching to long
time exposures)
4. After the exposure
Note: With low light, i. e. slower shutter speeds than
the flash, the camera should only be moved when the film has been advanced.
In the data panel
In the viewfinder
q
,
,
and
–
a
t
S
flashing
and
; also
As for default mode (No. 1); for automatic switching to long time expo-
B
t
S
for automatically
sures, for 2 s the following appear alternately:
controlled long time
aperture) or the set aperture (with A) and
exposures
sure times >30 s)
,
and
; at the
The relevant focus status display and
B
t
S
same time the counter
switches to display the
expired exposure time
and
As for default mode (No. 1)
t
S
1
/
60
s, the camera should be held steady, supported, or a tripod used. Even after
95
t
S
(with P, for the largest
(representing the expo-