Installing The Cooling Shroud - Dell EMC PowerEdge R230 El Manual Del Propietario

Figure 21. Removing the cooling shroud
1 cooling shroud
3 guide pin on the chassis wall
Next steps
1 Install the cooling shroud.
2 Follow the procedure listed in
Related links
Instalación del bisel frontal opcional

Installing the cooling shroud

Prerequisite
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Ensure that you follow the
2 Follow the procedure listed in
Steps
1 Align the guide on the cooling shroud with the guide pin on the chassis wall.
2 Lower the cooling shroud into the chassis until it is firmly seated.
When firmly seated, the memory socket numbers marked on the cooling shroud align with the respective memory sockets.
Después de manipular el interior del
Instrucciones de seguridad.
Antes de trabajar en el interior de su
2 guide on the cooling shroud
sistema.
equipo.
Instalación y extracción de los componentes del sistema 65