Jøtul F 105 Instrucciones Para Instalación página 15

4.6 Fitting a fl ue pipe with a rear outlet
The product is supplied from the factory with the smoke outlet
fi tted for the top outlet. If you want a rear outlet, proceed as
follows:
Fig. 20
A
3. Loosen, but do not unscrew the four screws (A) completely
and lift the convection plate up approx. 10 mm.
Fig. 21
A
4. Unhook the convection plate.
Fig. 22
5. Cut the rear outlet in the points (A) in the outlet and remove
the cover.
ENGLISH
A
A
A
15