Maintenance; Lawn Care - Greencut GLM680SX Manual De Instrucciones

MAINTENANCE

LAWN CARE

• Various forms of care are required depending on the type of grass area.
• Therefore, always read the instructions included on seed packages with respect to the mowing
height for the growing conditions in the given locality.
• It is necessary to always keep in mind that the larger part of grass consists of a stem and one or
more leaves.
• When the leaves are cut off completely, the lawn is damaged and the renewal of growth will be
much more difficult.
• The following instructions generally apply:
– Excessively low mowing causes disruption to the roots and subsequently "spotty"
appearance;
– In summer, mowing must be higher to prevent the soil from drying out;
– Mowing wet grass may result in a lower effi ciency of the blade due to grass catching
on the blade and grass being ripped out of the ground;
– In the event of exceptionally tall grass it is appropriate to perform the fi rst mow at the
maximum permitted mowing height of the machine and then mow again only after two
or three days.
• The lawn will have a better appearance when it is mowed regularly over its entire area at the
same height with alternating mowing directions.
MAINTENANCE
• All nuts, pins and bolts must be properly tightened so that the machine is in a safe and
operational condition. Regular maintenance is the basic prerequisite for ensuring safety of the
user, maintain the lawnmower's operating condition and high performance.
• Never store a machine with petrol in the fuel tank inside a building where the fumes could come
within range of an open fi re, sparks or sources of high temperature
• Before storing in any enclosed area, allow the engine to cool down.
• To reduce the risk of a fire, ensure that the lawnmower and in particular the engine, exhaust
muffler, battery and also the location of spare fuel storage are free of grass, leaves or excessive
amounts of lubricant.
• Regularly inspect the condition of the deflector and the grass catcher; replace if damaged.
• Drain the fuel in a well-ventilated area when the engine has cooled down.
• When removing or installing the mowing blade, use thick work gloves.
• It is necessary to check the balance of the mowing blade every time that it is sharpened.
ATTENTION
Before carrying out maintenance or repairs, stop the engine and disconnect the
spark plug.
59
EN