Safety; Components And Description - Titan XL255 Manual Del Propietário

Components
The shipping carton for your painting system contains the
following:
• Suction tube and return tube
• Pump cleaning adapter
• Spray gun with filter
• Spray tip assembly (see chart on next page)
• 25' (XL255, XL295) or 50' (XL335), 1/4" diameter pressure
hose
• Instruction manual
On/OFF Switch .............................. The ON/OFF switch turns the power to the sprayer on and off (O=OFF, l=ON).
Suction tube ................................... Fluid is drawn through the suction tube into the pump.
Fluid Section .................................. A piston in the fluid section moves up and down to create the suction that draws fluid through the
Spray Gun ...................................... The spray gun controls the delivery of the fluid being pumped. The gun model you have depends
Spray Hose ..................................... The spray hose connects the gun to the pump.
Return Tube ................................... Fluid is sent back out through the return tube to the original container when PRIME/SPRAY knob is
Pump Cleaning Adapter ................ The adapter allows you to attach a garden hose to the suction tube for easy cleanup (latex
PRIME/SPRAY Knob ...................... The PRIME/SPRAY knob directs fluid to the spray hose when set to SPRAY or the return tube
PressureTrac™ ............................. The PressureTrac™ regulates the amount of force the pump uses to push the fluid.
Quickflo™ valve............................. The Quickflo™ valve is designed to keep the inlet valve open and from sticking to dried materials.
Capacity:
XL255............ Up to .25 gallon (0.95 liter) / minute
XL295............ Up to .32 gallon (1.21 liters) / minute
XL335 ........... Up to .35 gallon (1.32 liters) / minute
Power source:
XL255 ........... 1/2 Hp universal motor
XL295 ........... 5/8 Hp universal motor
XL335 ........... 3/4 Hp permanent magnet DC motor
Power requirement:
15 amp minimum circuit on 115 VAC, 60 Hz current
English

Components and Description

Controls and Functions
suction tube.
on your sprayer model (refer to Spray Gun/Tip Chart, next page).
in PRIME position.
materials only).
when set to PRIME. The arrows on the PRIME/SPRAY knob shows the rotation directions for
PRIME and SPRAY.
The PRIME/SPRAY knob is also used to relieve pressure built up in the spray hose (see Pressure
Relief Procedure, page 7).
The Quickflo™ valve is activated manually by the user.
Tools needed for Assembly
• Two adjustable wrenches
• Extension cord (refer to Important Electrical
Information, page 3).
Specifications
Generator power requirement:
8000 Watt
Safety features:
Spray gun trigger lock and pressure diffuser; built-in tip
safety guard; PRIME/SPRAY knob for safe pressure
release.
Capability:
Sprays a variety of paints, primers, stains, preservatives
and other nonabrasive materials, including pesticides and
liquid fertilizers.
This pump should not be used with textured materials,
block filler, or asphalt sealer.
4