Hartmann Tensoval comfort Instrucciones De Uso página 9

The time appears above the reading
and M1 or M2 is displayed on the left.
M1 represents the reading for the first
person and M2 for the second. As long
as the reading is displayed, you can
apply the values to the respective per-
son by pressing M1 or M2. Otherwise,
if you do not apply them the reading is
automatically saved for the person on
the display.
To switch off the device, simply press
the START/STOP button. Otherwise the
device will switch itself off automatically
after 3 minutes.
If you wish to stop measurement for
any reason, simply press the
START/STOP button. The inflation or
measuring process is interrupted and
an automatic fall in pressure occurs.
8. Memory function
The memory recall is activated when
the "Memory Button" is pressed, when
the device is switched off. Press M1 for
the first person's recorded values and
M2 f or the second person. The corre-
sponding symbol M1 or M2 will be
displayed. First, the average value of
all saved data will be shown for this
person. An "A" appears on the display
and the number of readings, from
which the average value was calculated
is displayed in the top right-hand corner
(see fig.).
Press the memory button to access
memory position No. 1
Tensoval comfort can store up to
30 measurements. The most recent
measurement is always in memory
position No.1 and all old measurement
values shift down one position. When
all memory positions are occupied the
oldest value will be deleted each time.
By repeatedly pressing the memory-
button all stored values can be recalled
one by one.
The measurement and the relevant
number of the memory position appear
when you access stored values. The
memory position, date and time appear
in 2 – 3 second intervals.
You can cancel the memorys recall at
11
English