Power Supply; Environmental Conditions - Promax 8 SE Manual De Instrucciones

USER'S MANUAL. PROMAX-8
Bandwidth
Resolution
Peak detector
Span 100 MHz
Span 50 MHz
Span 30 MHz
Span 15 MHz
Span 5 MHz
Span 1 MHz
Average detector
Span 30 MHz
Span 15 MHz
Span 5 MHz
Span 1 MHz
TRANSIENT DETECTOR
Detection threshold
Detection range
Readout
AUDIO
Demodulation
Output
POWER SUPPLY LNB
Input
Output
Voltage
Current
Protection

POWER SUPPLY

Li-Ion battery
Low battery indication
Autonomy
Automatic power-off
Battery charge
Equipment consumption
Mains to charger adapter

ENVIRONMENTAL CONDITIONS

This equipment could be used on the following environmental conditions, in these
conditions the specifications could also be applied:
09/2013
SE
200 kHz.
900 to 920 kHz.
450 to 460 kHz.
270 to 280 kHz.
130 to 140 kHz.
40 to 50 kHz.
10 kHz.
270 to 280 kHz.
130 to 140 kHz.
40 to 50 kHz.
10 kHz.
From 30 to 60 dBμV in steps of 1 dB.
From 5 to 100 MHz maximum.
Number of detected transitory in the measuring
time. Present detected level and maximum detected
level in the time of the measurement.
AM / FM / LEVEL (variable tone according to the
signal level).
Internal speaker.
For the service connector.
By input signal connector.
24 V nominal (25 V max.).
500 mA max.
Current limiter.
7.4 V — 2.2 Ah.
Graphic indication on the display:
Approximately 6 hours.
Power-off after approximately 10 minutes of non-
use.
By fast internal charger.
12 W.
AL-101B 100 to 240 V AC/ 50-60 Hz / 12 V DC.
Page 5