Promax 8 SE Manual De Instrucciones página 92

To check the measurements stored in a
specific logger select the VIEW option:
The first line shows the channel plan (CCIR
in the example), the audio carrier offset (5.50 MHz),
the audio demodulation (FM) and the units of
measurement (dBμV). The second line shows the
logger number (53 in the attached figure) and the
headings of the measurements (V, V/A and C/N).
The measurements taken are shown in the
following format: first column shows the channel, the D indication on its right means it
has been defined as digital (see Edit Channel Plan function at section 4.2.1 Global
configuration menu), the second column shows the level (analogue channels) or the
channel power (digital channels), the third the V/A ratio (analogue channels) an the
fourth the C/N ratio (analogue channels). Turning the rotary selector [9] you can see the
re st of channels.
The time and date when measurements were taken appear at the end of the list
of measurements, in the following order: hour:minute:second and month:day:year. To
re turn to the initial menu of the LOGGER FUNCTION press LOGGER key.
To print the stored measurement select the PRINT field, previously consult
se ction 4.3 Connecting to a computer or a printer.
Page 38
Figure 45.- Ex ample of print.
USER'S MANUAL. PROMAX-8
Figure 44.- Viewing a logger.
SE
09/2013