Publicidad
Idiomas disponibles
Idiomas disponibles
TOP HUNG WINDOWS (Fig. 7)
1)
Open the package and extract the various components;
2) Fig. 8-
With a pencil draw the centreline "X" of the window frame;
3) Fig. 9-
Align the quick coupling to the centre line using as reference the rib located in the centre
of the same with the quick release side indicator on the right;
4) Fig. 10-
Position the quick coupling at a minimum height of 10 mm from the frame and mark the
drilling points;
5) Fig. 11/12-
With a suitable drill, perform two holes of Ø3.7mm on the wing and tighten the quick
coupling with proper screws;
6) Fig. 13-
Align to the centre line the window frame connection bracket using as reference the
indicator of the centre line located in the middle of the same;
7)
Position the bracket on the frame at such a height as to align the axis of thebracket fastening seat
with the axis of the fastening holes of the quick coupling, as indicated in
drilling points;
8) Fig. 15/16-
With a suitable drill, perform four holes of Ø3.7mm on the frame and tighten the
bracket with proper screws;
Fig. 8
20
Fig. 11
Fig. 14
Fig. 14
and mark the
Fig. 9
Fig. 12
Fig. 15
Fig. 7
Fig. 10
Fig. 13
Fig. 16
EN
Publicidad
