Lathem 5000E Plus Manual Del Usuario página 18

3
Press the [SELECT] button and position
the " " under the "COMMENT" mark.
Setting the 1st comment line.
At the moment, the flashing digit
indicates "Character Position". And then
press the [SET] button.
Character
Position
Comment
Line
SELECT
At the moment, the flashing changes
from "Character Position" to "Character
Code".
SELECT
14
Character
Code
COMMENT
CHANGE SET
COMMENT
CHANGE SET
4
Set the "Character Code".
In case of example, the 1st character is
"A", then enter the character code
"02".
Refer to the "25. CHARACTER
CODE FOR ALPHANUMERIC"
Press the [CHANGE] button until the
correct character code appears. And
then press the [SET] button.
The character code
"02" means "A".
SELECT
At that moment, the "Character
Position" changes from the 1st
character to the 2nd character.
The 2nd
Character
SELECT
CHANGE SET
COMMENT
CHANGE SET
14