How To Change Settings When The Password Is Set - Lathem 5000E Plus Manual Del Usuario

How to change settings when the Password is set

Once the password is set, you have to enter the password for changing any setting.
"9999" will be displayed when you press the [SELECT] button.
Example: Password "1234"
1
Press the [SELECT] button, at that
moment "9999" is displayed and the
first two digits flash.
(The flashing means it can be changed.)
SELECT
Set the first tow digits.
In the example, press the [CHANGE]
button to set at "12". And then press
the [SET] button.
SELECT
At that moment, the flashing changes
to the last two digits.
41
CHANGE SET
CHANGE SET
2
Set the last two digits.
In case of the example, press the
[CHANGE] button to set at "34". And
then press the [SET] button.
SELECT
TIME
SELECT
At that moment, the " " mark indicates
the "TIME".
3
Select desired setting mode by
pressing the [SELECT] button.
CHANGE SET
CHANGE SET
42