Lathem 5000E Plus Manual Del Usuario página 41

Confirming the Time Table Program settings
To confirm the programs that have been set, press the [SELECT] button and position the " "
over the "TIME TABLE PROGRAM" mark. At that moment, the "Program No." flashes.
And then press the [CHANGE] button.
After you finish confirming the program, press the [SET] button 6 times.
Now the time table program setting has been completed. Replace the cover and lock.
Important: If you do not complete confirming the settings, the Time Recorder will not print.
Deleting the Time Table Program settings
Example: Deleting the "Program No.2".
1
To delete a program, make the
"Program No." flash, and press the
[CHANGE] button until the desired
program No. is displayed.
SU
BUZZ
SELECT
Press the [SET] button. At that
moment, the display changes to the
following figure.
SELECT
2
Press the [CHANGE] button to set at
" ".
37
SELECT
MO TU WE TH FR
EXT. *OFF *ON
TIME TABLE
SIGNAL
PROGRAM
CHANGE SET
TIME TABLE
PROGRAM
CHANGE SET
TIME TABLE
PROGRAM
CHANGE SET
3
Press the [SET] button. At that
moment, the display changes to the
following figure.
SA
SELECT
4
After you finish deleting a program,
press the [SET] button once again.
Now the time table program setting
has been completed. Replace the cover
and lock.
Important: If you do not complete Step
4, the Time Recorder will not print.
TIME TABLE
PROGRAM
CHANGE SET
SU MO TU WE TH FR SA
36