Model #
Rating: Btu/Hr / kW
Fuel Consumption: Gal/Hr / L/Hr
Fuel Tank Capacity: Gallons / Liters
Pump Pressure: psi / BAR
Volts: AC/Hz
Amps
Phase
Upper Shell
Hot Air Outlet
Lower Shell
Lamp
Thermostat Knob
(80T KFA Only)
Fuel Tank
Power/Reset Switch
ASSEMBLY INSTRUCTIONS (140T-KFA / 175T-KFA / 215T-KFA)
1. Tilt the heater tank backward and attach the bottom
skid by inserting the skid into the button spring clips
at the front of the bottom support frame.
Axle Support
Tire
Axle Nut
2. Attach the axle supports by inserting them into the
button spring clips at the rear of the bottom support
frame.
3. Insert the axle through the holes in the axle supports.
4. Slide the spacers onto the axle.
5. Slide the wheels onto the axle and secure with the
axle nuts.
6. Attach the front handle by inserting the handle into
the button spring clips at the front of the top support
frame.
© 2018 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
®
SPECIFICATIONS
45-KFA
45,000 / 13.2
0.35 / 1.32
5 / 19
3.0 / 0.21
120VAC / 60Hz
1.4
Single
Specifications subject to change without notice.
Extension Cord Wrap
Handle
Fan Guard
Pressure Gauge
Fuel Gauge
Fuel Cap
Power Cord
Axle
Spacer
Figure 1
WHILE CONNECTED TO A POWER SOURCE
80T-KFA
140T-KFA
80,000 / 23.4
140,000 / 41.03
0.63 / 2.38
1.00 / 3.79
5 / 19
3.8 / 0.26
6.6 / 0.46
120VAC / 60Hz
120VAC / 60Hz
1.5
Single
FEATURES
Front
Handle
Hot Air
Outlet
Lower Shell
Fuel Gauge
Fuel Cap
7. Attach the rear handle by inserting the handle into
the button spring clips at the rear of the top support
frame.
8. Check all parts to ensure they are secure before oper-
ating the heater.
5
175T-KFA
175,000 / 51.3
1.34 / 5.07
10 / 38
13 / 49
7.5 / 0.52
120VAC / 60Hz
2.3
2.7
Single
Single
Upper Shell
Digital Temperature
Display
Lamp
Thermostat
Knob
Kerosene Forced Air Heater User's Manual
215T-KFA
215,000 / 63.01
1.63 / 6.17
13 / 49
9.0 / 0.62
120VAC / 60Hz
2.8
Single
Rear Handle
Fan Guard
Pressure
Gauge
Fuel Tank
Drain Bolt
Power
Cord