Disinfection - Drying - Storage - ICAN 20-100 Instrucciones De Uso

DISINFECTION - DRYING - STORAGE

DISINFECTION:
Disinfect the mask components in a suitable solution after use. Use a disinfectant
such as "MULTIDOR". Follow the instructions carefully (refer to disinfection
intervals in table 2, page 9).
DRYING:
ICAN FULL FACE should be air-dried or dried in a drying cabinet at a
temperature not exceeding 60°C. Avoid direct sunlight.
STORAGE:
Loosen the mask straps as much as possible.
Avoid deformation. Remember to use the storage brace in the full face mask during
storage.
Store ICAN FULL FACE in airtight and light-proof packaging in a cool and dry
place.
NOTE!
Silicone has a tendency to absorb detergents and disinfectants. Irritation of the
skin can occur as a result.
Therefore:
1. Reduce the time the substances are in contact with the mask, which is stated
in the instructions, to a minimum.
2. Rinse thoroughly in running water for 10 minutes, after cleaning and
disinfection of ICAN FULL FACE 20-300.
20-100/ 300 JULI 02 REV. 01. (GB)
(GB) 6
 copyright 2002