Troubleshooting - Yeedi K652G Manual De Instrucciones

4. Troubleshooting/4.1 Troubleshooting
No. Scenario
Robot is not able to
1 connect to the home
Wi-Fi network�
2 Robot is not charging�
Possible Cause
Incorrect home Wi-Fi username or password
entered�
Robot is not within range of your home Wi-Fi
signal�
Network setup started before Robot was ready�
Robot does not support 5 GHz Wi-Fi�
Robot is not switched ON�
Robot has not connected to the Docking Station�
The Docking Station is not connected to the
power supply�
The battery is completely discharged�
Solution
Enter the correct home Wi-Fi username and password�
Make sure Robot is within range of your home Wi-Fi signal�
TTurn ON Power Switch� Press the RESET Button� Robot
is ready for network setup when its Wi-Fi Indicator light
flashes slowly�
Make sure the robot has been connected with 2�4 GHz Wi-
Fi network�
Switch ON Robot�
Be sure that the robot's Charging Contacts have connected
to the Docking Station Pins�
Make sure the Docking Station is connected to the power
supply�
Please contact Customer Care for help�
23
EN