Spare Parts - salmson MINI SUBSON Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
10.FAULTS, THEIR CAUSES AND REMEDIES
FAULT
THE PUMP WON'T START OR
STOPS DURING OPERATION
THE PUMP DOESN'T TURN ON/
OFF
THE PUMP DOESN'T PUMP PROP-
ERLY
THE FLOW RATE DECREASES DUR-
ING OPERATION
If the fault can't be fixed, please contact your local specialist
or your nearest Salmson customer service location or repre-
sentative.

11.SPARE PARTS

Spare parts can be ordered from your local specialist and/or
via Salmson customer service.
To avoid queries and incorrect orders, always provide all of the
details on the name plate with every order.
We reserve the right to make technical changes!
CAUSE
Interruption to the power
Motor protection switch has tripped
The temperature of the pumped liquid is too
high
Pump is silted up or seized
Float switch is jammed or cannot move freely Check the float switch and make sure that it can
Air in the system can't escape
The water level is below the suction opening
The non-return valve in the pump port is stick-
ing
Kink in the hose / Stop valve closed
The suction basket is blocked / the impeller is
jammed
REMEDY
Check fuses, cables and electrical connections
Allow the pump to cool down; it will restart auto-
matically
Allow to cool down
Remove power from the pump and pull it out of
the shaft
Remove the suction basket and wash down the
suction basket and impeller under running water
move freely
Bleed air from the system, emptying if necessary
Check the switch off level
If possible, submerse the pump more deeply
(note switch-off level)
Check that it is working properly
Unkink the hose / open the stop valve
Remove power from the pump and pull it out of
the shaft
Dismantle the suction basket, wash down suction
basket / impeller under running water.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido