Maintenance - Omron Gentle Temp 720 Manual De Instrucciones

4. Troubleshooting and Maintenance
3. There are variances in the measurement values.
• Measurements were not taken at the same location.
• The probe lens is dirty.
4. The temperature measured on this unit is not equivalent to oral-temperature.
• Forehead thermometers may not always calculate the exact oral-equivalent value.
It is recommended to take regular measurements on subjects such as family members, etc., who are in
good physical condition, to know their normal temperature.
4.3

Maintenance

• Check the unit if it is dropped. If unsure, please contact the OMRON retail outlet or distributor for having the unit
checked.
• Clean the probe lens carefully to avoid damaging it.
- Use a 70% alcohol swab or soft cotton moistened with 70% alcohol to clean the probe lens.
- Allow the probe lens to fully dry for at least 1 minute.
• Do not store the unit in the following types of places. Doing so may damage the unit.
- Wet locations.
- Locations with high heat and humidity or those that are exposed to direct sunlight. Areas close to heating
equipment, dusty locations, or environments where there are high salt concentrations in the air.
- Locations where the unit will be subjected to leaning over, falling, shock, or vibration.
- Pharmaceutical storage areas or locations where corrosive gases are present.
14