Tansporting and Handling
With two people
1.
Tip the machine backwards
and remove the dust skirt.
NOTE! Always remove the dust skirt and the sanding disc before transportation!
When transporting the machine on a vehicle, make sure that the machine is securely fasten
through the wheels to avoid movement!
2.
Remove the drive plate.
3.
Raise the handle to an upright
position, pull out the front
carry handle and fold the
handle shaft.
Bona FlexiSand 1.9 Manual
4.
Grip the machine (two people)
by the two handles shown in
the photo.
9
EN