Filling The Medication Bottle - Omron micro Air NE-U22V Manual De Instrucciones

Ocultar thumbs Ver también para micro Air NE-U22V:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FILLING THE MEDICATION BOTTLE

Remove the Mouthpiece or Mask and the Mask and Mouthpiece Adapter from the Main Unit.
1. Open the Mesh Cap.
Hold the device securely
in your hand.
2. Fill the Medication Bottle.
WARNING
Pentamidine is not an approved medication for use
with this device.
WARNING
Do not use tap or mineral water in the nebulizer
for nebulizing purposes.
Be careful to prevent the Mesh Cap from closing
as shown in the illustration.
The maximum capacity of the Medication Bottle is 7mL.
CAUTION
Do not add more than 7 mL of medication to the
medication cup.
CAUTION
To prevent damage to the device, add the medication
slowly. Do not allow the medication to overflow the
medication port.
3. Close the Mesh Cap.
CAUTION
To prevent damage to the device, make sure that the Mesh Cap is
correctly in place. If the Mesh Cap is not properly closed,
medication will leak.
4. Attach the Mask and Mouthpiece Adapter to the Main Unit
Attach the Mouthpiece or the Child Mask to the Mask and Mouthpiece Adapter.
NOTE:
For instructions on attaching the Mask and Mouthpiece Adapter
return to Unit Assembly on Page 10.
Do not open the
Bottle Cap.
13
Lift up the mesh
cap while pressing
your thumb upward
on the brim.
Check that the
Mesh Cap is
closed.

Publicidad

Tabla de contenido
loading

Tabla de contenido