FuelTech WB-O2 Nano Manual De Instalación Y Especificaciones Técnicas página 23

Disconnect the O2 sensor plug that you want to associate to this position
and click "Associate".
Cylinder 2 3/4
CAN equipment to:
Cylinder 2
Associate
ID CAN: ---
Model: ---
CAN port: ---
Input: ---
Through FTManager Software:
Click "CAN Network" on the tool bar. All the equipment connected to the CAN
Network will be listed on this screen. Right click on the equipment you want
to associate and then select the position where it is installed.
The O2 sensor can also be associated through "Sensors and Calibration"
menu, then "CAN Communication".
To associate an O2 sensor to a reading, disconnect the O2 sensor plug and
then click "Associate". If there's one O2 sensor only connected to CAN network,
it is automatically associated when pressing "Associate" button.
Cylinder 2 4/4
Disconnect only 1 O2 sensor from O2 reader.
Make sure only 1 sensor is disconnected.
The reading will be associated to this position.
Associate Cylinder 2
WB-O Nano
2
Cylinder 2 4/4
Texto explicando o método
Desconectar a sonda do equipamento
Garantir que somente 1 sonda está desconectada
Setup successfuly performed!
Leitura será associada à sonda desconectada
etc
Ok
Associar Cilindro 2
EN
9