Options; Storage; Storage During Daily Use; Storage During Extended Disuse - Ottobock Walkstar Instrucciones De Uso

5.3 Options

The basic equipment may have been adapted to the needs of the user by adding options. For use of these options:
see Page 32 ff.

5.4 Storage

5.4.1 Storage during daily use

The product should always be stored so it is protected against external influences.

5.4.2 Storage during extended disuse

The product must be stored in a dry place. Specific information for extended storage: see Page 40.
It is not necessary to disassemble the product.
Maintain sufficient clearance from sources of heat. If the product is parked for an extended period of time or the
tyres overheat (e.g. in the vicinity of radiators or in case of exposure to strong sunlight behind glass), the tyres may
become permanently deformed.
During extended storage, the knee lever wheel lock on products with PU tyres (= tubeless tyres) must be released
since tyre deformation may otherwise result.

6 Preparing the product for use

6.1 Unfolding

CAUTION
Grasping the product incorrectly while unfolding and folding
Pinching, crushing due to lack of caution in the area of the folding mechanism
► Do not reach into the area of the folding mechanism.
► Only grasp the product by the described parts.
► Avoid pinching yourself on movable components.
CAUTION
Unprotected tripod springs
Unintentional adjustment of the frame, risk of tipping
► Make sure that the tripod springs are engaged after adjustment and sit firmly in the bores.
INFORMATION
On the topic of disassembly/transport: see Page 37.
1) Lay the product on the floor.
2) Grasp the product close to the middle of the front frame (see fig. 5) and unfold the frame.
3) Allow the tripod springs to engage with an audible click in the bores of the crossbraces (see fig. 6, item 1) on
both sides.
5
Walkstar
6
Preparing the product for use
31