Ensure A Proper Spray Pattern - Innotek 11122 Manual De Funcionamiento

5. Allow your dog to wear the collar for several minutes, then recheck the fi t. Check the fi t
again as your dog becomes more comfortable with the Anti-Bark Spray Collar™.
6. Trim the collar as follows:
a. Mark the desired length of the collar with a
pen. Allow for growth if your dog is young or
grows a thick winter coat.
b. Remove the Anti-Bark Spray Collar™ from
your dog and cut off excess.
c. Before placing the Anti-Bark Spray Collar™
back onto your dog, seal the edge of the cut collar by applying a fl ame along the
frayed edge.
Important: If these instructions are not followed, the buckle can easily be pulled off of the
collar. This could lead to the device being lost or damaged.

Ensure a Proper Spray Pattern

For the Innotek Anti-Bark Spray Collar™ to perform
®
properly, the nozzle must be positioned correctly
and there must be a clear path from the Spray
Nozzle to your dog's snout. Follow these steps:
1. Make sure the Spray Nozzle is upright and
pointing towards the dog's snout.
2. For long-haired dogs, it may be necessary to trim
the neck hairs along the path of the spray. It is
important that the spray reaches the dog's snout
to be effective.
3. For optimal performance the collar should be refi lled before each use.
Do not shave the pet's neck as this may increase the risk of
skin irritation.
www.innotek.net 7