Petsafe PDBDT-305 Manual Del Dueño página 5

Setting the Stimulation Level and Using Your Trainer
To set the stimulation level, first turn on
the receiver, next, hold down the "Program"
button. After a few seconds, the receiver
will indicate the present stimulation level by
beeping one-to-eight times. For instance, for
level 1 (the lowest stimulation level) the
receiver will beep once. For level 8 (the
highest stimulation level) the receiver will
beep eight times.
Continue to hold the "Program" button
down until the number of beeps equals the
level of stimulation you want. After level 8,
the receiver will go back to level 1.
The receiver memory will hold the set
level whether the unit has been turned off or
when the batteries
are being replaced.
Note
: Before you begin training with your new remote trainer, watch
the training video and read the training manual in its entirety.
Note
: You can expect your deluxe trainer to operate within a range of
approximately 300 ft. Actual range may vary due to obstacles, terrain,
weather, etc. For best results your pet should be within voice range to
associate your commands with praise or stimulation.
Stimulation
w/Tone
+
Warning
Tone Only
Program
Stimulation
Level
5