Switch On/Off Sound; Activation After Selecting The Programme; Quick Start; De-Activation - CASO DESIGN M20 Manual De Instrucciones

13.5 Switch on/off sound

Press the button Power/Sound for three seconds in order to switch on or off
the sound (beep tone).
You can hear messages of the programme ending and warning signals even
if the sound has been switched off.

13.6 Activation after selecting the programme

After selecting the program, press the button Start/Quickstart, to start the
preset cooking programme.

13.7 Quick start

Utilise this function to programme the oven for comfortable cooking at 100%
microwave performance.
Press the Start/Quickstart button in quick sequence to set the cooking time.
The oven starts automatically after 2 seconds.
Once the end of the cooking time is reached, three signal tones will be emitted and END
will appear in the display.

13.8 De-activation:

In order to interrupt an ongoing cooking programme, you can proceed as follows:

be stopped.

be stopped.
►
Start/Quickstart after closing the door.

time.
Before beginning a different cooking process you must delete the display and
reset the system by pressing the button Stop.
Press the Stop button once. The cooking programme that is in use will
Open the door of the device. The cooking programme that is in use will
Please note
To continue the interrupted cooking program, press the button
To terminate the interrupted program, press the button Stop a second
Please note
54