Promax TV EXPLORER HD+ Manual De Instrucciones página 150

C/N
Identify Timeout
Sat Band
Save DVB-T2 Info As:
Auto Power Off
Time Power Off
Terrestrial Units
Satellite Units
Rotary Selector
Ref. level
Transport Mode
Capture Timestamp
Factory Reset
Exit
Page 26
Defines the C/N measuring method between Auto or
Reference Noise (Manual), used to determine the
frequency where noise level will be measured in the
spectrum analyser mode.
Sets the maximum time that the equipment will carry out
the identification of a channel unknown before going to
the next one.
(Only satellite band).
Selects the C-band or Ku/Ka-band for tuning satellite
signals.
(Only for DVB-T2 signal).
It allows saving the DVB-T2 current configuration in a
text file (CSV format). Later it can be downloaded to a
PC via the remote control software (NetUpdate) or
directly into a USB.
When it is set to ON it activates the auto power off
function that forces shutdown after a time (defined in the
"Time Power Off" option) touching no key.
Select the power off timeout from 1 to 120 minutes.
Select the measurements units for terrestrial and cable:
dBμV, dBmV or dBm.
Select the measurements units for satellite: dBμV, dBmV
or dBm.
Select the movement sense: CW (clockwise) or CCW
(counter clockwise).
It selects the most suitable range when accessing to the
spectrum analyser mode: MANUAL (defined by the user)
or AUTO (calculated by the instrument).
It activates or it deactivates the automatic power off
function for transportation. So, it allows to prevent an
accidental start-up of the equipment.
It enables (ON) or disables (OFF) the timestamp on the
screenshots.
It recoveries the default settings (the ones the
equipment originally had). This option will remove all
acquisitions made by the user. Added channel plans are
kept.
Exit from preferences menu.
USER'S MANUAL. TV EXPLORER HD+
11/2013