Setting The Ts-Asi Input-Output - Promax TV EXPLORER HD+ Manual De Instrucciones

USER'S MANUAL. TV EXPLORER HD+
Then you have to install the software NetUpdate, which is also found in the
memory support delivered
TV EXPLORER HD+ and to perform various functions such as create and edit plans,
update firmware, etc..
Once installed all the necessary software on your computer, connect the
TV EXPLORER HD+ to the computer by using the CC-041 (mini USB male — USB male)
delivered with the equipment. After connecting, it appears an icon at the top of the
measurement screen (see next figure).
Run the program and make the connection with your equipment using the option
"Detect" on the program to access all the available features.
5.23

Setting the TS-ASI Input-Output

The TS-ASI option is a key feature for a TV analyser. It allows both input and
output transport streams. It automatically detects whether the stream is composed of
188 or 204 bytes. It can transmit in packet mode or burst mode.
To configure the TS-ASI, access the TV mode or the Measurement mode.
From the TV mode, press the measurement configuration key
the SETUP menu and go to the bottom of the menu until the ENABLE ASI INTERFACE
option.
11/2013
with your equipment.
Figure 66.-
It allows connecting
[17] to access
Page 91
the