Delete A Merogram File; Echoes And Pre-Echoes Analyser (Dvb-T/Dvb-T2) - Promax TV EXPLORER HD+ Manual De Instrucciones

USER'S MANUAL. TV EXPLORER HD+
5.17.2.3

Delete a MEROGRAM file.

To delete a MEROGRAM capture, press
CAPTURE. Then it pops up a new menu where you should select Other/. Then select
the file you want to delete.
5.18

ECHOES and PRE-ECHOES Analyser (DVB-T/DVB-T2)

The ECHOES Analyser can detect and display echoes that may appear when
receiving simultaneously the same signal from several transmitters. Another reason that
can cause echoes is the reflection of the signal on large objects such as buildings or
mountains. PRE-ECHOES are signals received before the main signal arrives.
With the ECHOES function is possible to know the distance from where we are to
the transmitter or the object that has caused the echo. Thus, the installer can minimise
the effects of echoes on the facility. Knowing echoes, the installer is able to reposition
the antenna and therefore, reduce the effect of echoes received.
This feature is only available for DVB-T/H and DVB-T2 signals. Therefore, you
should configure the TV EXPLORER
the ECHOES function will not appear on the menu "Utilities".
The steps to go through to set up the digital terrestrial reception are the next:
1. Press the key
terrestrial frequency band.
2. Press the key
measurement mode for Digital TV.
3. Check the led indicator "D" and the led indicator "T" are lighted.
4. Enter parameters manually to lock signal or press
Identification) for an automatic identification of the signal (see figure).
11/2013
[22] and select the option DELETE
HD+ in order to receive this type of signals. If not,
[14] (Satellite / Terrestrial Band) to select the TV
[17] (Measurement Configuration) to select the
[25] (Automatic
Page 83