Datalogger For Attenuation And If Sat Tests - Promax TV EXPLORER HD+ Manual De Instrucciones

5.10.1 Datalogger for Attenuation and IF SAT tests

The TV EXPLORER
executing an Attenuation test at terrestrial band or an IF SAT test at satellite band (see
section "5.11 Verification of distribution networks").
For it, one of these tests should be activated previously as the following figure
shows.
In order to make the automatic acquisition of these measurements, select it from
UTILITIES menu by pressing the
option, and later the NEW DATALOGGER option. In the CHANNEL SET field will
appear the type of test that the instrument is going to store automatically.
Figure 14.- Datalogger screen for Attenuation test frequencies.
Once the START option is selected the instrument will capture all test values
corresponding to the three pilot frequencies in the active band. When measuring is
completed, it will offer the options to store data or to start a new acquisition.
Page 38
HD+ allows to make measurement acquisitions while
Figure 13.- Attenuation Test. Terrestrial band.
[22] key, and activating the RUN DATALOGGER
USER'S MANUAL. TV EXPLORER HD+
11/2013