Erreka LINK-GSM Guía De Instalación, Configuración Y Uso página 27

Connections with VIVO-M203, VIVO-M204 or VIVO-D203

If required, the RL1 and RL2 relays can also be connected, although this is not necessary to activate the door
or gate, since the ST1 or ST2 opening signal is sent via the RS232. The ANT outside antenna can also be
installed, as shown in the layout in section "General connections".
Connections with standard control panels (one or two panels)

RL1 and RL2 can be connected with a single board (ST1 and ST2) or with two independent boards.
If the ANT exterior antenna is to be connected, see the layout in section "General connections".

A telephone number can activate one relay or another in accordance with the configuration of the RL1
or RL2 option. Whenever the telephone number is registered in both relays, both of them are activated
when making the missed call.
12 24
12 24
12 24 +5V
+5V
12 24 ST1 ST2
ST1 ST2
+5V
+5V
ST1 ST2
ST1 ST2
P1 P2 P3
ST1 FT1
P1 P2 P3 P4 P5 P6 P15 P14 P16
ST1 FT1 ST2 FT2 FCA1
P4 P5 P6 P15 P14 P16 P7 P8 P11 P12 P22 P23 G7 G8
Courtesy
24Vac
ST2 FT2 FCA1 FCC1 STOP LOCK
Light
P7 P8 P11 P12 P22 P23 G7 G8 G9 G10
Courtesy
LOCK 24Vac Lamp.
FCC1 STOP
Light
G9 G10 P1 P2 P3 P4 P5 P6 P15 P14 P16 P7 P8
Lamp.
ST1 FT1 ST2 FT2 FCA1 FCC1
P256C
G1 G2 G3
N L
POWER
MOTOR1 (G2-G1-COM)
P256D
P11 P12 P22 P23 G7 G8 G9 G10
Courtesy
24Vac Lamp.
STOP LOCK
Light
P256E
27