Optoma W505-M Manual De Instrucciones página 97

Este proyector
v
cumple por
completo con
las especifica-
ciones de
JBMIA PJLink
™ Class 1.
Admite todos
los comandos
definidos
por PJLink
™ Class 1 y el
cumplimiento
ha sido
verificado
con la versión
1.0 de las
especifica-
ciones del
estándar
PJLink™.
Command Description
INPT? Inquiry about input
switching
AVMT Mute control
AVMT? Inquiry about the
mute state
ERST? Inquiry about the
error state
LAMP? Inquiry about the
lamp state
INST? Inquiry about the
available inputs
NAME? Inquiry about the
projector name
INF1? Inquiry about the
manufacturer name
INF2? Inquiry about the
model name
Apéndices
Remark (Parameter)
12 = VGA2
13 = Component
14 = BNC
21 = VIDEO
22 = S-VIDEO
31 = HDMI 1
32 = HDMI 2
30 = Video and audio mute
disable
31 = Video and audio mute enable
1st byte: Fan error, 0 or 2
2nd byte: Lamp error, 0 to 2
3rd byte: Temperature error, 0 or
2
4th byte: Cover open error, 0 or 2
5th byte: Filter error, 0 or 2
6th byte: Other error, 0 or 2
0 to 2 mean as follows:
0 = No error detected, 1 =
Warning, 2 = Error
1st value (1 to 5 digits):
Cumulative LAMP operating time
(This item shows a lamp operating
time (hour) calculated based on
that LAMP MODE is LOW.)
2nd value: 0 = Lamp off, 1 = Lamp
on
The following value is returned.
"11 12 21 22 31 32"
The projector name set on
the NETWORK menu or the
ProjectorView
Setup window is returned
"Optoma" is returned.
"EH7700" is returned.
97