Control Display - Dacor DOP36M96GL Manual De Instrucciones

Troubleshooting
Problem
The burners do
not burn evenly.
Very large or
yellow surface
burner flames.

Control display

Problem
The display goes
blank.
Touch controls
do not respond
when tapped
94 English
NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN.indd 94
Possible causes
Burner components are not
assembled correctly.
Burners are dirty.
The wrong burner orifice is
installed.
Possible cause
A fuse in your home may be
blown or the circuit breaker
tripped.
There is foreign matter caught
between the buttons
There is moisture on the
exterior
The lock function is set
Action
Review page 79.
• Clean the burner components.
• Review pages 76, 77, 78.
Check the burner orifice size, and
contact your installer if you have
the wrong orifice (LP gas instead of
natural gas or vice versa).
Solution
Replace the fuse or reset the
circuit breaker.
Remove the foreign matter and
try again.
Remove the moisture and try
again.
Check whether the lock function
is set.
2019-07-29 10:52:50