Swing Mode - MTS BTUh Manual De Usario

Press the SWING button until the letters "SL" on the remote control are displayed
and the symbols flash once and the temperature indicator disappears.
Briefly press the Up and Down buttons until the
order to adjust the louver's horizontal orientation of about 6 degrees. Keep the Up
or Down buttons pressed until the
tion) starts.
In the models provided with this mode (models Pavimento/Soffitto FMH) press the
Right and Left buttons until the
inner louver's inclination.
Note concerning the flaps:
- In Cooling mode it is recommended to point them upwards (to avoid having a
direct flow of cool air)
- In Heating mode it is recommended to point them downwards (as hot air tends to
rise)
Attention: do not adjust the directional flaps manually as their delicate mechanism
could be damaged.
The "deflectors" situated beneath the flaps should be pointed manually in order to
allow the air flow to be pointed to the right or to the left.
ATTENTION:
- Unplug the appliance or switch off the dedicated switch before performing any ope-
rations (risk of personal injury from electrocution).
- Do not direct the air flow directly towards people, artworks or animals (risk of cau-
sing damage to things and personal injury to people's skin)
- Do not insert or attempt to insert your fingers or various objects in the internal and
external unit air outlets and in the inlet grilles (risk of personal injury from cuts).
- Do not touch the air conditioning unit with wet hands (risk of electrocution).
ADVICE ON ENERGY SAVINGS
· Do not programme too high a temperature (in heating mode) or too low a temperature (in
cooling mode).
· Avoid installing the internal/external units in places directly exposed to sunlight (this could
prevent the appliance from operating at its best).
· Avoid opening and closing doors and windows too frequently, as the ongoing heat
exchange with the outside hinders the operation of the air conditioning unit.
· Use the "Timer" for the timed starting of the appliance to prevent the appliance from ope-
rating unnecessarily while you are out.
· Use the "SLEEP" function at night.
ATTENTION:
- Do not attempt to perform maintenance operations requiring the opening of the
appliance yourself: the presence of live elements and the gas contained in the cooling
circuit make these operations particularly dangerous (risk of personal injury from elec-
trocution and cold burns).
- When moving home, contact an authorised specialist.
NOTES:
- In cooling mode, you may detect a slight mist coming out of the Internal Unit for a few
seconds: this is completely normal and due to the difference in temperature between
the air exiting the appliance and the air inside the room.
- During operation, you may hear a noise similar to the flowing of water: this is comple-
tely normal, owing to the liquid refrigerant flowing through the piping.
- When the air conditioning unit starts or stops, especially in heating mode, you may hear
a little creaking: this is due to the thermal expansion of the parts making up the applian-
ce.

SWING MODE

symbol start flashing briefly in
symbol lights up and the autoswing (func-
symbol flashes briefly in order to adjust the
Directional
Deflectors
Flaps
UK
25