Publicidad
Idiomas disponibles
Idiomas disponibles
REPLACING THE BATTERIES
When:
- the Internal Unit does not emit a confirmation Beep
- the liquid crystal display does not come on
How:
- remove the cover by pulling it gently downwards as illustrated
- replace the batteries, respecting the + and - symbols
N.B.
- Use new batteries only.
- Remove the batteries from the remote control when the air
conditioning unit is not in use.
ATTENTION:
If the remote control doesn't work to verify the position of the
selector set next to the batteries; the selector will have to be in
position "A".
ATTENTION:
- Unplug the appliance or switch off the dedicated switch before performing any
operations.
(risk of personal injury from electrocution).
- Do not touch the air conditioning unit with wet hands (risk of personal injury from
electrocution).
- When cleaning the appliance, do not climb onto a table or unstable chair (risk
of personal injury from falling from a height).
- When removing filters, take care not to touch any metal parts, especially the
heat exchanger inside the internal unit (risk of personal injury from cuts).
1. Clean the filters and secure them back in place.
2. On a sunny day, operate the air conditioning unit in ventilation mode for a
few hours, so that the inside is dried completely.
3. Unplug the appliance or disable the automatic switch.
IF THE AIR CONDITIONING UNIT DOES NOT WORK
1. If the air conditioning unit gives no sign of life, check the supply voltage:
- is the appliance plug fully in the socket?
- has the automatic switch blown?
- has there been a power failure?
2. If the cooling (or heating) effect seems to be lower than normal:
- has the temperature been set correctly on the remote control?
- has a door or window been opened?
- is the Internal Unit exposed to direct sunlight?
- are the filters clogged?
- are there any obstacles obstructing the free circulation of air to the Internal Unit
or External Unit?
Size AAA 1,5V
END OF SEASON MAINTENANCE:
A
B
UK
27
Publicidad
Capítulos
