Escalade Sports Atomic Instruction Manual página 6

STEP 3:
Center and attach P3 Playfield in the cabinet using pre-drilled pilot holes with H4 Screws as shown in FIGURE 3.
Place each P5 Playfield Support Brace and attach using pre-drilled pilot holes with H5 Screws as shown in
FIGURE 3.
Important Note: Please be sure to install H4 screws and H5 screws
exactly as per FIGURE 3. Screws must be screwed straight down.
IMPORTANT NOTE: Center P3
Playfield before installing H4 and
H5 Screws.
If P3 playfield is not centered,
you may need to loosen H1
Bolts ( in Step 2 ) to correctly
center the P3 Playfield
- Retighten H1 Bolts once P3
Playfield is correctly centered.
PARTS REQUIRED:
16 pcs - H2 Allen Head Bolt
16 pcs - H3 Flat Washer
16 pcs - H12 Lock Washer
STEP 4:
Attach P4 Legs using H2 Allen Head
Bolts with H12 Lock Washers and H3 Flat
Washers as shown in FIGURE 4 & DETAIL B.
Use T1 Allen Wrench to tighten H1 Bolts.
Thread P10 Leg Levelers onto each P4 Leg
as shown in FIGURE 4.
All Rights Reserved.
© 2012 Escalade Sports
PARTS REQUIRED:
12 pcs - H4 Phillips Washer Head Screw
6 pcs - H5 Phillips Flat Head Screw
4 pcs - P4 Leg
4 pcs - P10 Leg Leveler
1 pc - T1 Allen Wrench
FIGURE 4
3 pcs - P5 Playfield
H5
P5
P5
DETAIL B
P10
P4
P10
6
Support Brace
H4
P5
H3
H12
H2
P4
For Customer Service Call 1-888-996-2729
FIGURE 3
P10
P10
P4
P4