Bentel Security B-TEL2 Manual De Instalación Y Usuario página 38

Call attempts
Program the number of times a call is attempted for each programmed telephone number by entering the
following formula:
where <Number of attempts> is a number between 1 and 9 (factory set at 3).
Bypass answering machine
Enable/disable Bypass answering machine by entering the following formula:
?  @      C
?  @      C
Number of rings
Program the number of rings after which the dialer will answer an incoming call by entering the following
formula:
where <Number of rings> is a number between 1 and 9 (factory set at 3).
If the Bypass answer machine option is enabled, the dialer will ignore this parameter.
Tone on PSTN fail
Enable/disable notice of telephone line failure by entering the following formula:
?  @      C
?  @      C
Tone check
Enable/disable DTMF tone check by entering the following formula:
?  @      C
?  @      C
Pulse dialling
Select the pulse/tone dialing by entering the following formula:
?  @      C
?  @      C
Call all voice messages numbers
Enable/disable the option to call all voice numbers by entering the following formula:
?  @      C
?  @      C
Call all telemonitoring numbers
Enable/disable the option to call all Telemonitoring numbers by entering the following formula:
?  @      C
?  @      C
38
 
?    @
<Number of attempts>
(to disable bypass answering machine - factory setting)
(to enable bypass answering machine)
?   @  

(to disable the tone - factory setting)
(to enable the speaker tone)
(to enable Tone check - factory setting)
(to disable Tone check)
(to select tone dialing- factory setting)
(to select pulse dialing)
(to disable the option)
(to enable the option - factory setting)
(to disable the option - factory setting)
(to enable the option)
C
<Number of rings>
C
B-TEL2