Installation Style; Keystone; Pincushion; Anamorphic - JVC D-ILA DLA-X95R Manual Del Usuario

Installation Style

For setting to "Front", "Ceiling Mount (F)", "Rear", or "Ceiling Mount (R)" according to the installation status of the
projector.
"Front" or "Ceiling Mount (F)" is set when projector is installed in the front with respect to the screen.
0
"Rear" or "Ceiling Mount (R)" is set when projector is installed in the rear with respect to the screen.
0

Keystone

For correcting any keystone distortion that occurs when the projector is installed at an angle with respect to the screen.
Horizontal setting range: -40 to +40
0
Vertical setting range: -30 to +30
0
* Correction cannot be performed during 3D signal input.

Pincushion

For correcting distortion of the projection screen.
Setting range: -20 (pin-cushion) to +20 (barrel)
0
* Correction cannot be performed during 3D signal input.

Anamorphic

Configure this setting when an anamorphic lens is used.
Setting
A
B
Off

Screen Adjust

By selecting the optimal correction mode according to the characteristics of the screen in use, corrections can be
performed to reproduce natural images with balanced colors.
Æ "Setting Screen Correction" （p. 32）

Environment Setting D C B

By configuring "Environment Setting" according to the viewing environment, image quality adjustment and correction
according to environmental differences are performed automatically to minimize any influence on the image quality.
Æ "Adjusting Image Quality Automatically According to the Viewing Environment D C B" （p. 31）

Black Level A

For setting the black level in the environment of use.
Setting range: 0 to 10
0
A frame as shown on the right appears at the center (gradation is accentuated in the
illustration, but not in the actual image).
The current black tone is displayed on the right side. Adjust accordingly until the
boundary line with the left frame is no longer noticeable.
This adjustment reduces the black side, and has a subtle influence from the black
0
(dark) side to the white (bright) side. Adjust according to your preference.
Projects the 2.35:1 image with it stretched in the vertical direction only.
Projects the 16:9 image with it compressed in the horizontal direction only.
Projects the 2.35:1 image without any changes.
Description
57