JVC D-ILA DLA-X95R Manual Del Usuario página 66

Install the new lamp unit
5
.
Tighten the screws of the new lamp
6
unit
Tighten the screws with a t screwdriver.
0
.
Attach the lamp cover
7
Insert the two tabs at the top and bottom of the
0
lamp cover into the unit.
Tighten the screws with a t screwdriver.
0
.
66
Usable lamp life
Handle
Purchasing a lamp unit
Please consult your authorized dealer or nearby service
center.
Lamps with a different product number or those for other
projector models cannot be used.
Information about the lamp
An ultra-high pressure mercury lamp with a high internal
pressure is used in the projector.
Due to the characteristics of this lamp, it may blow out
with a loud noise or go out when it is subject to shock or
after using for a prolonged period of time (the time before
the lamp blows out or goes out varies considerably with
each lamp as well as the operating conditions).
After replacing the lamp
MEMO
When the lamp is used with "Lamp Power" set to "Low"
0
, the lamp life on this unit is approximately 4000 hours.
This is the average usable time and not a guaranteed
value.
The lamp life may not reach 4000 hours depending on
0
the operating conditions.
When the lamp has reached the end of its usable life,
0
deterioration progresses rapidly.
When the video image appears dark, when the color
0
tone looks unnatural, or when the image flickers,
replace the lamp unit with a new one promptly.
Lamp unit
0
Product no.: PK-L2312U
*
Do not place the removed lamp unit at a place that is
0
within reach by children or anywhere near
inflammable items.
Dispose used lamp units in the same way as
0
fluorescent lamps. Follow the regulations of your local
community for disposal.