Timex INTELLIGENT QUARTZ Manual De Instrucciones página 56

7. Push crown in to position 1 when finished.
Please note: The 4th center hand will track the time using
the current calibration of the minutes within the hour.
Time zones 2 and 3 both utilize the 4th center hand and
therefore the locations being tracked in time zones 2 and
3 must both utilize the same minutes within the hour for
these time zones to be displayed properly.
SETTING THE 4TH CENTER HAND (TIME ZONE II)
Note the current time in the location you wish to track
as the 2nd time zone. Press button A until the 4th center
hand is pointing to that time on the inner ring. (Please
note: this scale is a 24-hour format). The 4th center hand
will advance 30 minutes each time button A is pressed.
Pressing and holding button A will make the hand move at
a fast rate. This will set the 2nd time zone on the watch.
106
SETTING THE CASE ROTATING TOP RING
(TIME ZONE III)
The 3rd time zone is set by using the existing setting of
the 4th center hand and adjusting the case rotating top
ring to the desired time of the 3rd time zone. (Please note:
this scale is a 24-hour format). The top ring has 72 posi-
tions. To advance the top ring one hour you will advance
it three positions (3 "clicks"). Note the current time in the
location you wish to track as the 3rd time zone. Rotate
the case top ring counter clockwise to position the cor-
rect hour marker for that time with the 4th center hand.
107