Indel B RM7 Instrucciones De Uso página 28

RM7
R E VE R S I N G TH E O PE N I N G S I D E O F TH E D O O R
If necessary, the opening side of the door door can be reversed, from right to left, or vice versa.
Reverse the opening side of the entire door unit as follows:
• Remove the bottom flange 1 by unscrewing the four retaining screws, two on each side.
• Remove hinges 2 and 3 fixed to the cabinet of the device by unscrewing the fixing screws.
Remove the "L" bracket 4 in position C by unscrewing the fixing screws.
•
• Remove the hinges 5 and 6 fixed to the door of the device by unscrewing the fixing screws.
• Remove the caps 7.
• Install the door hinge that was previously in position A in position C.
• Install the door hinge that was previously in position B in position D.
• Insert the caps 7 and fit the "L" bracket 4 in position B.
• Install the hinges previously fixed to the cabinet on the opposite side (position C and D).
• Fix the bottom flange 1 to the cabinet of the device.
C
D
RM7_(DC)_IM_20190723
B
4
A
3
7
1
26
2
7
6
5