During Maintenance Or Inspection; When Handling Supplies - Toshiba e-STUDIO2802A Información De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 65
.
Other points
Do not turn the power OFF with misfed paper remaining inside the equipment.
This could cause a malfunction when the power is turned ON next time.
Be sure to turn the power OFF when leaving the office or if there is a power outage. However,
do not turn the power OFF if the weekly timer is in use.
Be careful because the paper exit area and paper just after exiting are hot.
Do not place anything other than paper on the receiving tray. This could disturb a normal
operation and cause malfunctions.
Do not touch the photoconductive drum. This could cause image problems.
e-STUDIO2802A/2802AM/2802AF
Do not open/close the covers and the bypass tray, or pull out the drawers during printing.

During maintenance or inspection

Never attempt to repair, disassemble or modify the Multifunctional Digital Systems by
yourself. You could cause a fire or get an electric shock.
Always contact your Service representative for maintenance or repair of the internal parts of
the Multifunctional Digital Systems.
Do not let liquids such as water and oil get into the system when cleaning the floor. This could
cause a fire and give you an electric shock.
Always keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This
could cause a fire and give you an electric shock due to the heat released by electric leakage.
Other points
Do not use such solvents as thinner or alcohol when cleaning the surface of the
Multifunctional Digital Systems.
- This could warp the shape of the surface or leave it discolored.
- When using a chemical cleaning pad to clean it, pay attention to any cautionary points.

When handling supplies

Never attempt to incinerate toner cartridges. Dispose of used toner cartridges in accordance
with local regulations.
Other points
Read the operator's manual carefully to replace the toner cartridge using the correct
procedure. An improper procedure could cause toner leakage or scattering.
Do not open the toner cartridge forcibly. This could cause toner leakage or scattering.
18 (GB)
Safety Information
e-STUDIO2309A/2809A

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

E-studio2802amE-studio2802afE-studio2309aE-studio2809a

Tabla de contenido