Presentation - Hergom E-40 Instrucciones Para Instalación, Uso Y Mantenimiento

1 - INTRODUCTION
IMPORTANT! All local regulations, including those that refer to national or European regulations, must
be applied when installing this device.
The way the E-40 Stove is installed will decisively affect safety issues and its correct operation.
It is important to install the fireplace correctly. For the correct installation of the E-40 Stove and
chimney, we recommend the installation be performed by a professional.
The E-40 Stove provides heat by radiation; directly heating walls, ceilings...

2 - PRESENTATION

E-40 wood stoves have the following main features:
Manufactured in two versions: stand stove (with legs), and based stove (without legs)
Made of cast iron, with parts that are assembled, sealed and screwed together.
The internal lining is manufactured in cast iron White enameled
Vertical smoke exit through the top with the possibility to switch to Horizontal smoke exit through the
rear.
Hinged front door with ceramic glass pane.
They are designed for use with firewood only.
They can burn pieces of wood up to 50 in length.
Exterior ash pan
Blind grill
Lighting up valve
Primary air adjustment valve.
Self-cleaning glass.
Optional outside air connection located on the back of the ash pan
This fireplace provides heat by radiation directly heating walls, ceilings
Fully factory assembled, ready for connection to the chimney
Door
handle
Puerta
Regulation
handle
Ash-pan
Optional rear
output smoke
Outside air
connection
20