Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Service programs
NOTE
Outlet
Inlet
14
Changing from Testomat
808
If you wish to replace a Testomat
®
tomat
808 instrument, please use our water supply and discharge
conversion kit (Article no. 37576).
Switch the Testomat
Pull the hose
from the outlet of the Testomat BOB
Unscrew the inlet and discharge connection
Remove the Testomat
Install the Testomat
instrument will fit into the same position as the Testomat
®
Testomat
BOB dimensions are identical.
Screw the reduction
Connect the water supply and discharge of the Testomat
with a 6/4 x 1 opaque plastic hose (max. length 5 m).
You are advised to install a manual shut-off valve in the secondary
supply to the Testomat
Flush the supply pipe to remove dirt particles before operating.
To operate the Testomat
ating instructions for the Testomat
Prevent soiling
It is essential to establish a vertical connection in order to prevent
dirt particles from being carried from the main water supply into
the instrument.
®
BOB to Testomat
®
BOB instrument with a new Tes-
®
BOB off and disconnect its power supply.
®
BOB from the wall or control cabinet.
®
808 in the space now vacated. The new
into the inlet connection.
®
808.
®
808, proceed as described in the oper-
®
808.
®
®
.
.
®
808 and
®
808
Publicidad
Tabla de contenido
