Enter.dAta; Editing.dAta - Urmet BiBus sinthesi s2 Manual De Instrucciones

Lock.rel..codes
1°.Code:
Enter.the.4-digit.code.and.press.
. to. cancel. the. entry.. The. second. code. can. be.
entered automatically after a confirmation tone. The
system will automatically return to the main menu at
the.end.of.programming..Alternatively,.press. .for.
three.seconds.to.go.back.to.the.main.menu..
Code type
The module can be used to call users with numeric
codes.(0001-9999).
The following message will appear on the display:
=. Code.Type. . .
Num... 1.9999.. . .
Press. .and. .to.select.the.code.type.and.press.
to confirm.
Codes/names
The. names. and. respective. codes. can. be.
programmed in this menu. The following message
will appear on the display:
=. Code/Name. .

Enter.Data.. .

=. Code/Name. .
Modify.Data. .
=. Code/Name. .
Clear.All.
Press. .and. .to.select.the.sub-menu.and.press.
. to confirm.
Enter data
The.user.codes.and.respective.names.and.personal.
door.opener.codes.can.be.programmed.in.this.sub-
menu..
The first free position in the 250 item table will
appear.(one.item.for.each.user):.
DS107-035
to confirm. Press
=
↓
=
. .
↓
=
. . .
↓↑
=
. . .
↑
Position:.... 1
Code:
Enter.the.numeric.or.alphanumeric.code.formed.by.a.
variable.number.of.digits.from.1.to.4.and.press.
confirm. Press .to.correct..Press. for.longer.than.
three.seconds.to.go.back.to.the.previous.menu..The.
same code can be entered in two or three positions
in an apartment where two or three door phones
are. connected. in. parallel. (you. are. advised. to. use.
adjacent positions to simplify the association). The
following will appear on the display after entering
the.code:.
Code.1001... .
The.name.can.be.entered.later..In.this.case,.press.
and enter the new code. Proceed as follows if
the user name is known. Press . and. . on. the.
call.module.keypad.to.seek.the.required.character..
Select the character. The cursor will shift right by one
position to enter a new character after approximately
one.second.if.no.other.button.is.pressed..Press. .to.
delete.the.last.entered.character..Use.programming.
keyboard.103/65.to.considerably.facilitate.entry.of.
names..
The.same.name.can.be.assigned.to.different.codes..
Enter.the.name.and.press.
door opener code. The following message will
appear.on.the.display:
Code.Lock.rel.
.
Enter.the.personal.door.opener.code.and.press.A.
to confirm. The general code programmed during
the. "Door. opener. code". phase. cannot. be. entered..
Press. without entering a code to skip assigning
a.door.opener.code.to.the.user..
Editing data
The.data.related.to.the.entered.users.can.be.edited.
in this sub-menu. The following search criteria can
be.applied:.
• search.by.position.in.table.(1-50)
• search.by.name..
The following message will appear on the display:
Modify.Data
Search.by.Pos..
.to.
Name:
.to.enter.the.respective.
. .
↓
3